Contract Airline Services


"We are the protagonists of our stories called life, and there is no limit to how high we can fly."


PHD. MBA. MHS. Type rated on A350, A330, B777, B747-400, B747-200, B757, B767, B737, B727. International Airline Pilot / Author / Speaker. Dedicated to giving the gift of wings to anyone following their dreams. Supporting Aviation Safety through training, writing, and inspiration. Fighting for Aviation Safety and Airline Employee Advocacy. Safety Culture and SMS change agent.

Thursday, September 6, 2012

Getting too Slow on Departure with the A330

What if a crew encountered a slow speed situation before the flaps were fully up after takeoff? This might occur due to a windshear scenario or simply not putting the nose down after thrust reduction. In either case, at some point below VLS, Alpha Floor activated, and the PF followed up with proper selection of TOGA thrust and recovering the speed.

However, once they got everything back under control and resumed their climb there was one puzzling aspect: the speed bug was at Green Dot and not 250. The airplane did not want to accelerate for the climb. There were no speed limits or constraints in the flight plan that might cause that to happen and no system malfunctions. So what was the cause of this mysterious behavior?

As you now know from last weeks discussion, if the target speed is Green Dot, the go-around phase is probably active. In this case, the go-around phase became active when TOGA was selected with the flap lever at 1 or more!



As you read in the quiz answers, the solution is to get out of Go-Around is to either activate the approach, or change the destination and then insert a new cruise altitude. Since their destination did not need to be changed (like it might if you were diverting to an alternate after a go around), activating the approach and re-inserting the cruise altitude is the correct and quick solution. This will result in changing the active flight phase to the CLB and the target speed returning to its 250/ECON climb profile.

Understanding of the operation of Airbus flight phases and their corresponding managed speed values, and use of managed speed will reduce your workload and enable you to operate the airplane at peak efficiency to avoid inadvertent speed errors.

All Airbus pilots should understand the system’s operation. Remember, when things get confusing, no matter what the managed speed value, you can always override with either selected speed or manual thrust lever operation.

As you fly keep an eye on the target speed and observe its behavior as the flight phases change. Use it to your advantage to let the airplane fly the speeds you want without having to manually select them.

4 comments:

  1. Great article, I hope one day to fly an airbus. I'm documenting my current Instrument training in Western PA at http://zeeflyers.blogspot.com

    ReplyDelete
    Replies
    1. Hi Malki, Just checked out your blog. Best of luck on your flight training. One day you will be flying the Airbus. One flight at a time, you'll get there!

      Delete
  2. Replies
    1. Funny. I wish! That's exactly what we need. A do over. Or an easy button would be nice.

      Delete

Thank you for your comment! If your comment doesn't appear immediately, it will after I land. Enjoy the journey!